Permanent Holiday Lighting - DIY Kit for 100 Linear Feet - ShawTech Lighting

Description

Permanent Holiday Lighting - DIY Kit for 100 Linear Feet - ShawTech Lighting
Save 00+ on permanent holiday lighting for your home by installing it yourself. Save hours on research by following our instructions.
Includes everything you need to install 100 linear feet of permanent holiday lights on your house except for the channel and screws.
Includes
Online Instructions (written w/ video on most steps)
Controller + Power Supply inside water resistant enclosure
100 ft of LEDs with 6-inch spacing
125 ft of 18/2 cable for power injection
50 ft of 18/3 cable for data/power
Electrical Connectors
Tools
Does not include (you will need to purchase this)
Vinyl J-channel (Used to hold the LEDs)
Size
Channel width of 5/8" at the base
Quantity
Same as your roofline. If you have 100ft of roofline, get just a bit over 100ft of channel
Price
{{detail_product_description}}.50 - .00 per foot
Where to purchase
Home Depot, Lowes (verify this is available in your area before purchasing kit)
Alternative: Gladiator GearWall Trim
Screws (Used to attach channel to your house)
Size
Almost any size will work. We usually use small deck screws (#8 x 1-1/4")
Quantity
1 screw ever 3-4 feet of channel
Price
{{detail_product_description}}.08 - {{detail_product_description}}.12 per screw
Other Notes
This is a very DIY solution. If you are not a DIY type of person, this is probably not for you.
Plan on 1-2 days to install this with 2 people. We recommend you have 2 people to make it safer and faster.
If you have both a large main floor and 2nd floor roof it may be better to get 2 kits. You can sync the controllers together.