SH Scientific 1200℃ laboratory muffle furnace, 14L, material heat treatment 220V

Description

SH Scientific muffle furnaces offers from 1050 ℃ to 1800 ℃ with unbeatable prices.
SH Scientific laboratory benchtop muffle furnace MG series goes up to max 1200 degrees Celsius (℃) and the ideal operating temperature is 1000 degrees Celsius (℃).
If your testing is carried out under this temperature in any case, do not overpay for standard design. This universally used muffle furnace is designed for your budget-saving.
Our MG series are the most affordable quality muffle furnace in the market. Save your budget.
Our muffle furnace takes less than 40min to reach 800℃.
SH Scientific muffle furnaces are ideal for wide range of application including ashing, calcination, oxidation, sintering, hardening and tempering, melting, thermocouple calibration, annealing, stress relieving and etc.
14L chamber (L250xD350xH160mm)
Laboratory benchtop muffle furnace with swing door
Recommended ideal running temperature is below 1000℃
Heating from 4 sides and excellent temperature uniformity (+/-2.5%)
Excellent outgassing thanks to the exhaust air outlet on the head of chamber, i.e plastic polymer
Double housing and low surface temperature (29~30℃ at 800℃)
Ceramic fiber materials which are not classified as carcinogenic
Light weight. 70kg
Prompt heat up and good maintaining
SSR operation and PID control provides low noise operation and precise temp control (+/-1℃)
Muffle furnaces are needed when you carry out heat-involved testing and treatment with rapid high-temperature heating, recovery and cooling in self-contained energy-efficient cabinets. Muffle furnaces are ideal for ashing samples, heat-treating applications and material testing and research.
These days the use of furnaces are more rapidly growing throughout the advanced industries such as secondary battery, graphene battery, polymer composite, treatment of titanium
Good news! Are you looking for vacuum muffle furnace for carbon-free atmosphere for materials from metal & ceramic injection molding, metallization and sintering?
SH Scientific vacuum muffle furnace is the solution providing a precisely defined atmosphere with the highest possible purity.
Model
SH-FU-14MG
Max temperature
1200
℃
Continuous running temperature
1000
℃
Chamber volume
14liters
Controller
Digital PID controller
Sensor
K type
Heater
4.1kW
Heating element
KANTAL A-1
Insulation
Ceramic
Power supply
220V, 50/60Hz, 1p, 18A
Net weight
70kg
Chamber size
250x350x160mm
External size
500x610x670mm